Sub-sections in this section
Articles in this section
- An explanation of NAT Traversal and passing IPSec through firewalls
- Changing a Slave Smoothwall Appliance to Be the Master on a Failover Setup
- Checking the IP Address Configuration Without Access to the User Interface
- Connection Monitoring in the Smoothwall Filter & Firewall
- Deleting an Interface/IP Address
- Diagnosing External Traffic Not Connecting with Internally Hosted Servers
- Diagnosing Not Relaying DHCP Addresses to Devices
- DNS Settings
- External IP Aliases Not Working
- IPSec Road Warrior devices are losing connection every 30 minutes behind a NAT gateway, what can be done?
- L2TP roadwarrior users are getting a "Domain cannot be found" Error
- L2TP Troubleshooting Guide
- Port forwards to my web / mail server are failing
- Redirecting Android Device Web Traffic to Use Global Proxy
- Setting up the Web Proxy on Internal Network Interfaces, Best Practices and Tips
- Smoothwall not detecting new load balancing IPs
- Stopping Reserved DHCP Addresses Being Assigned to Devices
- System Log Warning Message "Caution: have detected 200 accesses to IP address xx in the last 15 mins"
- Universal Plug and Play (UPnP) - Not Supported by the Smoothwall
- Using Client Certificates with Android Devices in Global Proxy Setups
- Using Microsoft Forefront Threat Management Gateway flood mitigation with Smoothwall
- Using Service Objects Instead of Port Groups from the Inverness Release Onwards
- Web Filter Can't Connect to the Internet After Some Network or Routing Changes
- What's the main difference between transparent and non-transparent proxies?
- When trying to remove an IP address in the UI I get an error message and the IP address is not removed.
Also see our User Assistance Resources page.