How to reset the different types of passwords on your Smoothwall./
Recovering the Web Interface admin password:
To change the admin password, you will need to log on to the Smoothwall as the
root superuser in an SSH session:
- Connect to your Smoothwall via a console using the SSH protocol on port 222 (typically, via an application such as Putty).
- Log in as the
- From the command line, type
setupand press ENTER.
- Press ENTER on Change admin password.
- Enter the new credentials and press OK.
Note: Although there is an option in the setup menu to change this root password, you cannot rec
Resetting root password on a Smoothwall
If the original
root password cannot be found, you will have to create a new one. To do this, the Smoothwall will need to be rebooted into single user mode as the
root password cannot be set in the user interface.
- Ensure you have a keyboard and monitor (or console cable session) connected to the Smoothwall.
- Reboot the box and press ESC until the GRUB boot loader appears. Note that if you are using your own hardware, it may be the DEL key to enter the GRUB menu
- You will see 2 options:
Smoothwall-smpand press e to edit.
You will be taken to an output box with
- Look for the line containing the UUID. It will look something like this:
- Use the arrow keys to navigate between the two single quote marks at the end and type the word
singleonto the end of the line:
legacy_kernel 'boot/vmlinuz-#.#.##-#-smp' '/boot/vmlinuz-#.#.##-#-smp' 'root=UUID=RANDOMNUMBERSTRING' 'single'
- Press CTRL-X or F10 to continue booting
- The box will appear to boot as normal, but when the boot is completed, instead of seeing:
you will see:
setupand press ENTER. This will take you into the setup menu where you can reset the
- When you have reset the
rootpassword, reboot the box using the following command:
shutdown -r now
This issues a shutdown and reboot command with the time parameter set as immediate. Please then test the