Skip to main content

Edit IP addresses for an Interface

Updated

If you have changed your internal network, you must update your internal interfaces in Smoothwall On-Premise Appliance with the new IP addresses.

  Important

Don’t edit an Interface you’re currently using to connect, or you’ll need to re-connect.

1: Change the IP addresses

  1. Go to Network > Configuration > Interfaces.
  2. Find the interface, and within it select IP addresses. You’ll see an Attached addresses table.
  3. Select Edit.
  4. Edit the IP address.
  5. Select Save changes.

2: Update your Web Proxy authentication policies

Go to Web Proxy > Authentication > Manage policies. The table will show the updated interface, but the back end still has the old interface. You must edit the policy to apply the IP address changes.